Exetools - Asprotect 1.23 New Tutorial by LaBBa

Page 2 of 2

Show 40 post(s) from this thread on one page

Exetools (https://forum.exetools.com/index.php)

- General Discussion (https://forum.exetools.com/forumdisplay.php?f=2)

- - Asprotect 1.23 New Tutorial by LaBBa (https://forum.exetools.com/showthread.php?t=3223)

britedream

01-17-2004 02:56

to get out of the loop f12 stops olly, then
set bp(f2) below jnz, f9, then trace again

R@dier

01-17-2004 09:27

Hi MaRKuS-DJM

Quote:

hm, i used trace, but the trace always hangs in an endless loop.

I trace, hit that loop, hit Esc key then set Bp Just below it and trace again, very similar to what britedream has mentioned.

I was wondering though, my working dump is about 200k larger then the file you posted with two extra sections.
(one is from Imprec).

MaRKuS-DJM

01-17-2004 19:02

yes, R@dier, i did not manually unpack it. i thought if aspr stripper works, why make it yourself? the filesize is smaller... i did it yesterday manually and my dump is 200 K larger, too!

All times are GMT +8. The time now is 02:38.

Page 2 of 2

Show 40 post(s) from this thread on one page