|
I have this kind of microdog dongle, anyone guide me to dump this dongle and make emulator, Thank's in Advance.
[Port1] : MicroDog USB Device
Is Port User Connectable: yes
Is Port Debug Capable: no
Companion Port Number: 0
Companion Hub Symbolic Link Name:
Protocols Supported:
USB 1.1: yes
USB 2.0: yes
USB 3.0: no
Device Power State: PowerDeviceD0
---===>Device Information<===---
English product name: "UMI V3"
ConnectionStatus:
Current Config Value: 0x01 -> Device Bus Speed: Low
Device Address: 0x03
Open Pipes: 0
*!*ERROR: No open pipes!
===>Device Descriptor<===
bLength: 0x12
bDescriptorType: 0x01
bcdUSB: 0x0110
bDeviceClass: 0xFF -> This is a Vendor Specific Device
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 = (8) Bytes
idVendor: 0x08E2 = SafeNet China Ltd.
idProduct: 0x0002
bcdDevice: 0x0000
iManufacturer: 0x01
English (United States) "SafeNet Inc."
iProduct: 0x02
English (United States) "UMI V3"
iSerialNumber: 0x00
bNumConfigurations: 0x01
---===>Full Configuration Descriptor<===---
===>Configuration Descriptor<===
bLength: 0x09
bDescriptorType: 0x02
wTotalLength: 0x0012 -> Validated
bNumInterfaces: 0x01
bConfigurationValue: 0x01
iConfiguration: 0x00
bmAttributes: 0x80 -> Bus Powered
MaxPower: 0x32 = 100 mA
===>Interface Descriptor<===
bLength: 0x09
bDescriptorType: 0x04
bInterfaceNumber: 0x00
bAlternateSetting: 0x00
bNumEndpoints: 0x00
bInterfaceClass: 0xFF -> Interface Class Unknown to USBView
bInterfaceSubClass: 0x00
bInterfaceProtocol: 0x00
iInterface: 0x00
|